Specifications - Railing Design - Canadian > Part III Execution

3.1 Installation
.1 Give at least three (3) days notice to the owner before starting work onsite.
.2 Conform to all the latest Ministry of labour, Occupational Health and Safety Act requirements during installation of the work.
.3 Take site measurements to ensure that railings are fabricated to fit surrounding construction, around obstructions and projections in place, as shown on the drawings, and to suit service locations.
.4 Install railings plumb, true, square, straight, level, and accurately and tightly fitted together and to surrounding construction.
.5 Provide stainless steel anchor bolts, washers, nuts, sleeves, brackets, clips and other items necessary for secure installation of the railings.

3.2 Cleaning
.1 Repair areas of bare metal, welds and shop applied finishes in field only with the approval of the Consultant.
.2 Clean off dirt on surfaces resulting from installation.
.3 Touch up coating where damaged during transport or installation. Use material approved by the manufacturer.